Synthetic Opal & Pink Coral Stripe Inlay Ring

Three precision-cut inlay stripes — warm dusty rose-pink coral on each side, vivid blue-green synthetic opal at the center — flush-set into a wide rectangular signet face. Crafted with lab-created synthetic opal, pink coral, and solid 14k yellow gold — wearable art that holds its value.

Please note: Due to the structural integrity of the inlay setting, this ring cannot be sized — stones may crack or dislodge if sizing is attempted. Please confirm your ring size carefully before purchasing.

• Synthetic Opal: 1 Lab-created (Gilson) | Vivid blue & green play-of-color | Center stripe | Flush inlay | Mohs 5–6
• Pink Coral: Natural | Warm dusty rose tone | Top & bottom stripes | Flush inlay | Mohs 3–4
• Ring Size: 9 — cannot be sized | Inlay setting — any sizing attempt risks cracking or dislodging the inlay | Please confirm your size carefully before purchasing
• Metal: 14k Yellow Gold | Solid | Precision-cut flush inlay | Epoxy-secured | Wide rectangular signet band | Mirror-polished | High-polish
• Dimensions: Length: 9.38mm (3/8"-) | Width: 9.98mm (3/8"+) | Depth: 4.50mm (3/16"-)

Crafted in our USA workshop, start to finish.

Color Note:

The vivid blue-green play-of-color at the center contrasts with the warm dusty rose-pink tones of the coral stripes above and below.

Stone Notes:

Synthetic opal is a lab-created material with a Mohs hardness of 5–6, engineered to replicate the visual properties of natural opal and displaying vivid blue and green stripe play-of-color. Pink coral is an organic gem with a Mohs hardness of 3–4 and warm dusty rose tones.

A Note on Color:

Photography is captured under controlled lighting to represent this piece as accurately as possible. The synthetic opal’s blue and green play-of-color shifts with the angle of light and view. Colors may read slightly differently depending on your light source, screen calibration, and brightness.

Care:

Your jewelry is a lifetime investment and a work of art — treat it with the care it deserves. The inlay setting requires specific care — avoid prolonged water exposure, soaking, and steam cleaning, as moisture can affect the epoxy adhesive bond between the inlay and gold. Remove before sleeping, swimming, bathing, or any prolonged water exposure. Avoid chlorine, harsh chemicals, and prolonged chemical exposure. Never apply lotions, creams, hairspray, perfume, or cosmetics while wearing — always put on last. Avoid prolonged exposure to perspiration. Avoid impact and abrasive surfaces. Keep away from hot water, direct sunlight, and sudden temperature changes. Never use ultrasonic cleaners on this piece. Wipe gently after each wear with a soft, dry cloth dampened with plain water only — do not soak or rinse under running hot water. Store separately in a soft pouch away from harder jewelry. Annual inspection recommended — verify inlay integrity, gold dividing bar integrity, epoxy bond, and signet-face integrity at each inspection.